Active research/ROAR Lab

Hybrid Drive
Robot Hand

Tendon positioning with direct motor assistance

Robotic ManipulationTendon DriveDirect DrivePrototyping

The project

01 / 03

I’m designing and prototyping a hybrid tendon and direct drive robot hand at Columbia’s ROAR Lab.

The tendons position the finger links and apply large forces. A local motor adds force in the tangential direction, with a ratchet mechanism intended to let it assist the motion without opposing the tendons.

Conceptual robot hand illustration with tendon paths and a motor at the palm.
Concept illustration

Intended mechanism behavior

02 / 03

The relative tension in the two tendons determines how the motor should be allowed to drive the next link.

Similar tendon forces
The ratchet stays centered, allowing the motor to drive the next link in either direction.
One tendon dominates
The ratchet engages to one side. The motor can assist in the dominant tendon’s intended direction, while motion in the opposing direction slips.

Current work focuses on mechanism design and prototyping. These behaviors describe the design intent.

Design presentation

03 / 03

Tendon routing, actuator relationships, and joint torque equations for the hybrid hand.

Slide 1: Tendon routing and actuator kinematics

2 slides · Use the arrow keys to browse

Slide description